DRAWING-BASED INDUSTRIAL BEARING PARTS
Aluminium Alloy Bearings
Custom aluminium-alloy bearing parts made to the specified dimensions and material requirements.

ON THIS PAGE
Illustrated Configurations
9 configurations in this family. Catalogue references identify illustrated configurations; they are not standard model numbers.
Images illustrate product configurations. Final dimensions, materials and acceptance requirements are confirmed in the agreed specification.
P002

Aluminium Magnesium Alloy Bearing
An aluminium magnesium alloy bearing component for rotating machinery.
Cylindrical bearing shell with a split joint and visible oil holes.
P014

Aluminium Magnesium Alloy Bearing
An aluminium magnesium alloy bearing component for rotating machinery.
Pair of curved half shells with visible holes and split edges.
P023

Aluminium Magnesium Alloy Bearing
An aluminium magnesium alloy bearing component for rotating machinery.
Plain cylindrical ring with a smooth internal bearing surface.
P024

Aluminium Magnesium Alloy Bearing
An aluminium magnesium alloy bearing component for rotating machinery.
Cylindrical shell with circumferential grooves and oil holes.
P025

Aluminium Magnesium Alloy Bearing
An aluminium magnesium alloy bearing component for rotating machinery.
Curved half shell with a broad inner bearing surface.
P079

Aluminium Magnesium Alloy Bearing
An aluminium magnesium alloy bearing component for rotating machinery.
Pair of split cylindrical components shown from different angles.
P080

Aluminium Magnesium Alloy Bearing
An aluminium magnesium alloy bearing component for rotating machinery.
Cylindrical shell with machined circumferential grooves.
P081

Aluminium Magnesium Alloy Bearing
An aluminium magnesium alloy bearing component for rotating machinery.
Smooth cylindrical shell with a split joint and visible oil holes.
P082

Aluminium Magnesium Alloy Bearing
An aluminium magnesium alloy bearing component for rotating machinery.
Cylindrical shell with a grooved outer surface and a flanged edge.
Typical structure
Bearing shells or other aluminium-alloy bearing geometries specified for the equipment. The source catalogue includes aluminium-magnesium alloy bearing parts.
The product photograph illustrates a catalogue example. Final geometry is made to the approved part requirements.
Operating conditions — reviewed for each application
Load and speed; mating shaft material and finish; lubrication conditions; temperature; start-stop cycles; fit and clearance requirements.
| Condition | Information required |
|---|---|
| Load | Magnitude, direction, steady and peak values; radial and/or axial duty as applicable. |
| Speed | Rated and transient shaft or collar speed in rpm, rotation direction and start-stop frequency. |
| Temperature | Normal and maximum lubricant and bearing temperatures, with any OEM limit. |
| Lubrication | Lubricant type or grade, supply method, pressure, flow and inlet temperature where available. |
Load capacity, speed and temperature limits are reviewed case by case. They depend on geometry, material, clearance, lubrication and the equipment arrangement.
Material options
The aluminium alloy grade and composition must be specified or confirmed during review. Aluminium-magnesium alloy is represented in the catalogue; do not assume equivalence to a Babbitt grade.
Customisable details
Bore, outside diameter, width, flange and split details, oil holes, grooves, locating features and drawing-defined tolerances or surface finish.
Provide nominal dimensions, units, tolerances and the drawing revision. Changes to an existing design need to be identified before manufacture.
Inspection & quality documents
The inspection method, acceptance criteria and document scope are agreed for each order. Specify the checks you need when requesting a quote.
| Check | Order review |
|---|---|
| Dimensions and geometry | Drawing-based checks of specified sizes, fits, features and tolerances. |
| Material verification | Requested alloy or layer specifications and required material records. |
| Surface and finish | Visual condition and specified finish or contact requirements. |
| Records | Request a dimensional report, material record and applicable inspection report; availability and scope are confirmed before order acceptance. |
Information for a quote
- Part and assembly drawings.
- requested aluminium alloy.
- existing sample information.
- shaft and housing sizes.
- load and speed.
- lubrication.
- quantity and inspection requirements.
Attach PDF, DWG, DXF or STEP files through the inquiry form. Include quantity, destination and your required delivery date. For a used sample, identify wear and any dimensions that must be restored.