Skip to content
Custom bearings · Drawings / Samples / Dimensions [email protected]

Home / Bearing Materials

DRAWING-BASED INDUSTRIAL BEARING PARTS

Bearing Materials

Specify the lining alloy and backing material together. Material selection is reviewed against the bearing geometry, load, speed, lubrication, temperature and original equipment requirements.

Spectrometer used for material analysis
Spectrometer used for material analysis · Manufacturing example

Babbitt lining materials

Babbitt, also called white metal, covers tin-based and lead-based bearing alloys. Supply the requested alloy designation or chemical composition when you send the drawing. The lining grade, thickness and backing must be confirmed together.

The table below is a designation reference. It does not imply that every alloy is stocked or suitable for every bearing.

ASTM B23 alloy designation reference

ASTM alloy numberUNS designationAlloy family
1L13910Tin-based
2L13890Tin-based
3L13840Tin-based
11L13870Tin-based
7L53585Lead-based
8L53565Lead-based
13L53346Lead-based
15L53620Lead-based

Reference: ASTM B23-20(2025), Standard Specification for White Metal Bearing Alloys. ASTM B23 covers alloys supplied as bars or ingots. Finished bearing dimensions and operating limits are specified separately.

Confirm chemistry and acceptance requirements against the specified standard edition. Similar trade names or nominal compositions do not establish exact grade equivalence.

Backing materials

Backing option for reviewWhat to specify
SteelExact grade, geometry, joining details and any required heat treatment or material records.
Cast ironExact grade, existing shell condition and the required lining and machining scope.
Other specified metalGrade, compatibility with the lining and the drawing requirements; availability is confirmed during review.

For re-babbitting, identify the existing backing and provide photographs of cracks, distortion or other damage.

Other bearing materials

Aluminium alloy bearings require their own alloy and geometry specification. Metal-plastic thrust pads require the polymer face, support layer and backing construction to be identified.

These materials should not be treated as direct substitutes for a Babbitt grade without application review.

Material information for an RFQ

  • Requested standard, edition and alloy designation, or chemical composition.
  • Backing grade and required lining or layer thickness.
  • Original equipment material requirements.
  • Material verification, traceability and documentation requested for the order.

WhatsApp · Quote

WhatsApp · Get a Quote